Air Blasters & Animatronic Controllers

Similar to other manufacturers cannons, but at a fraction of the price, our mini air cannon delivers a large blast of air that is guaranteed to startle without blowing out your viewers eardrums.

To use this mechanism, simply mount the included brackets to a stable wall, apply power to the valve, attach an air source (ie your air compressor), allow the tank to fill (60-80PSI recommended), push the trigger button and BANG!!!!!!!!
Out fires half a gallon of compressed air in less then a half second.

Automation should only be used when small children ARE NOT going to be present.

No mandatory re-fill is required between firing with this version.
ONLY FIRE CANNON TOWARDS VIEWERS FEET.

Constructed using only professional parts, the cannon includes a 1/2 gallon air tank with clip on mounting brackets, High flow dump valve, hand held trigger and 12v electrical connections. Requires 110V power and a compressor with 100-120 PSI.

Our ankle tickler features six 12" silicon whips that erratically whip around your viewers feet.

To operate, simply secure mechanism behind or on a wall (you will need to drill 6 3/8" holes thru wall if mechanism is located behind wall), apply pressure to main air inlet (runs off 60-120 PSI) and plug in power supply.

To actuate the manual ankle tickler, simply push hand held trigger button and whips will begin to whip around erratically.

Kit includes 12V DC valve, 6.5' supply hose, six 14" whips, hand held controller with 12' of wire and air supply hose w/ 1/4" NPT male fitting. Requires 110V power and a compressor with 100-120 PSI.

Our Spitter mechanism is a professionally designed, tested, and perfected mechanical device that allows for just about any prop or scenic element to spray water at viewers when triggered.

Simply run mechanism upwards through the props body, place nozzle into the mouth, and submerge the feeder tube (purple) into water (1-5 gallon recommended, but works great in a barrel prop where the reservoir is part of the prop).

When triggered, water will siphon from reservoir, and a fine mist of water will shoot between 6-12' out of the mechanism tip.

Kit includes 12V valve, back flow prevention valve, 10' tubing, and feeder system.
(Skull not included) Requires 110V power and a compressor with 100-120 PSI.

Similar to other manufacturers cannons, but at a fraction of the price, our air cannon delivers a huge blast of air that is guaranteed to startle. A custom designed resonator allows for amplification of the blast. Also our cannon can be modified to suit other special effects like pirate cannons, or cannon ball impact splashes.

To use this mechanism, simply mount the cannon to a stable surface, apply power to the valve, attach an air source (not included), allow the tank to fill (60-80PSI recommended), push the trigger button and BANG!!!!!!!! Out fires gallons of compressed air in less then two seconds.

Two minute re-fill is mandatory between firing. Automation should only be used when small children ARE NOT going to be present.
ONLY FIRE CANNON TOWARDS VIEWERS FEET.

Constructed using only professional parts, the cannon includes a 5 gallon air tank with welded mounting brackets, High flow dump valve, resonator, hand held trigger and 12v electrical connections. Requires 110V power and a compressor with 100-120 PSI.

Size 22" x 16" x 14"