The Barrel lifter is a uniquely designed lifter for use in a standard 55 gallon steel drum. The lifter utilizes the barrels strength as its main mounting surface which provides ample support and minimizes the wasted mounting space other lifters require. This maximizes the room within the barrel, in turn allowing for larger props to fit within the tight space. Best of all it can be used (and was designed specifically for) use under water.
The lifter includes two welded mounting brackets that connect into the barrels wall and approximately 40' of tubing to route the valve far away from the barrel. This setup includes a 12v valve setup with 110V transformer, to minimize any risk of shock if used in conjunction with water. However the wall mount transformer must be placed away from and mounted securely to a wall, away from areas that may come in contact with water.
Lifter provides 24" of vertical movement measured from the top of the mounting platform (designed to completely submerge a full bucky torso).
This kit includes 12V valve, flow controls for adjusting the lift and decent speeds, and all required airlines for connection to your compressor line. No controller is included. Requires 110V power and a compressor with 100-120 PSI.
Size 24" x 16" x 6"