Spider Web Spinner

 

 

 

 

 

Spin web's like an Award Winning Arachnid with this little baby

 

Materials Needed:

1 - power drill (WARNING: Always use caution when using power Tools)

1 - old fan blade (use a plastic one (Again, use caution when using the blade in the drill, keep hands and other body parts away from the moving blades)

2 - rubber washers

1 - 5 inch bolt

1- nut for the 5 inch bolt

1 - empty plastic container ( yogurt containers work well )

lots and lots of rubber cement ( because you will web everything in site once you see this little baby work )

 

Instructions:

Step 1 - dismantle an old fan. Use a plastic blade, DO NOT USE A METAL BLADE. WARNING - Plastic can also be dangerous and can cut you so by all means keep the blade away from yourself when operating the Spider Web Spinner.

Step 2 - drill a hole in the center of the yogurt container then put one rubber washer on the bolt and insert it into the container. Put the other rubber washer on the other end of the bolt at the bottom of the container.

Step 3 - insert the container with the bolt assembly into the hole in the center of the fan blade making sure you have the fan blades facing the right way. ( You want the blades pushing wind out like normal fan operation )

Step 4 - screw the nut onto the bolt, and tighten so the container is nice and tight against the fan blades.

Step 5 - cut four slits in the container cover so the rubber cement ( Spider Web Gook ) can ooze out.

Step 6 - insert the end of the bolt into any power drill and tighten

Step 7 - fill the container up with Rubber Cement, Snap on the lid and go and spin webs just like any award winning arachnid.